New Özbudak DOUBLE CHOP KRAKEN1800D trailed forage harvester
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+90 506 099...
Show
+90 506 099 89 53
+90 506 156...
Show
+90 506 156 80 00
Turkey 
3 m
Turkey
1.5 m
Turkey
0.75 m
Turkey
2.2 m
Turkey
Turkey
Turkey
Turkey
1.3 m
Turkey
1.25 m
Turkey, İZMİR/ÖDEMİŞ
1.5 m
Turkey, İZMİR/ÖDEMİŞ
Turkey
Turkey
Turkey
Turkey
Turkey
650 m
Turkey
Turkey
Turkey, Konya
0.65 m
Turkey, BALIKESİR/KARESİ
Turkey, SELÇUKLU/ KONYA
are able to chop the materials wich laid to surface before.
Very special chopper blades pass trough some special process for make them strong against any hard material in cropland. The chopper blades cuts the material and transfer it to auger for next step. The auger transfer the material to 2. chopping unit for maket he crop optimum sizes and at the end flue serve your healthy&fresh material to trailer.
With different working width, there is always a Ozbudak Double Chop Forage Harvesters fit for your enterprises.
All Ozbudak Double Chop Forage Harvesters fully equipped with hydraulic system to make your chopping experience better.
Like the all other OZBUDAK products, we produce the hundred percent of Ozbudak Double Chop Forage Harvester’s gearbox units and other components in our facilities. As a matter of fact, the ability of our machine to operate with
minimum power requirements is reflected in the fuel and time, it operates with minimum fuel consumption and it is an another plus to our customers.
ÖZBUDAK Double Chop (Çift Kıyım) Ot Silaj Makinası ile bu tip bitkileri ideal boyutta parçalar ve saklayabilirsiniz. Böylece yeşil yemin olmadığı mevsim dilimlerinde sadece mısır silajı ve endüstriyel yemlere muhtaç kalmadan hayvanlarınızın beslenmesini sağlayabilirsiniz. Bunun yanısıra bitkilerin yeşil zamanlarında da günlük biçim yaparak hayvanlarınıza sağlıklı ve besin değeri yüksek yemler yedirebilirsiniz.
ÖZBUDAK Double Chop (Çift Kıyım) Ot Silaj Makinasının üzerinde bulunan dayanıklı ve yüksek performanslı ve tamamen kendi üretimimiz olan şanzıman kutusu sayesinde traktörünüz ile yorulmadan rahat bir biçimde silaj yapabilirsiniz.
ÖZBUDAK Double Chop (Çift Kıyım) Ot Silaj Makinasının özel çelikten üretilmiş hareketli bıçakları biçme işlemi sırasında sert bir cisim ile karşılaştığında geriye atarak kırılmayı minimuma indirmektedir. Yine çok özel çelikten üretilen kıyıcı bıçaklar biçilen materyali ikinci kez kesim yaparak sağlıklı silaj boyutunun yakalanmasını sağlar.
ÖZBUDAK Double Chop (Çift Kıyım) Ot Silaj Makinası sahip olduğu hidrolik sistem sayesinde makinanın bacasının kaldırılması, bacanın sağa sola dönüşü, şapkanın aşağı yukarı hareketi ve makinanın biçim yüksekliğinin ayarı çok rahat bir biçimde yapılmaktadır.
Özbudak markasını taşıyan her ürün gibi Kraken Grubu bileşenlerinin %98’ini, en önemli bileşenlerinin ise(şanzıman kutusu, parçalayıcı bıçak vs.) %100’ünü kendi tesislerimizde geniş makine ekipman parkurumuz ile üretmekteyiz.